Mantus M1 2.5lbs (1.13kg) Stainless Steel Dinghy Anchor Kit
£228.67
The Mantus M1 Stainless-Steel Dinghy Anchors kit is designed for use with a dinghy, tender, canoe and kayak anchor. This 2.5lbs (1.13kg) 316L stainless-steel anchor is designed for boats up to 20 feet in length and weighing less than 1.36 tonnes. Incredibly compact it easily breaks down for storage and require no bolts, a spring-loaded pin locks the shank in place and the roll bar stretches to snap in position.
Comes complete with bag, 50ft of 5/16 Double braid line & stainless-steel thimble, 1/4 Stainless steel shackle and protective nose cover.
The Mantus M1 Stainless-Steel Dinghy Anchor Kit is engineered to deliver unmatched holding power across all seabeds. In independent testing, it set faster and deeper than other top anchors—including Rocna, Manson Supreme, Fortress, Bruce, CQR, Danforth, and Bulwagga. If you're searching for a Mantus anchor review, the results speak for themselves. Watch the test video here.
This Mantus dinghy anchor kit is perfect for inflatable boats, tenders, and small craft. The sharp, chisel-shaped nose is precision-machined for maximum penetration, while the roll bar ensures optimal setting angle every time. Once buried, the anchor stays secure—even when load direction changes.
Made from marine-grade 316L stainless steel, the Mantus anchor is hardened through shot-peening and electro-polished for maximum corrosion resistance. Its modular design assembles without bolts—just a spring-loaded pin and snap-fit roll bar—making it easy to store on any small boat.
The Mantus M1 dinghy anchor weighs 2.5lbs (1.13kg) and is suitable for boats up to 20 feet in length and weighing less than 1.36 tonnes and comes complete with bag, 50ft of 5/16 Double braid line & stainless-steel thimble, 1/4 Stainless steel shackle and nose cover.
Whether you're looking for the best anchor for inflatable boats, dinghy's, a long-range cruiser, racing yachtsmen, or daysailer, Mantus simply offer the best boat anchors available.
• Formed out of high-quality 316L stainless-steel.
• Surface hardened by shot-peening.
• Surfaces electro-polished to provide maximum corrosion resistance.
• Highly polished aesthetic.
• No bolts required.
• Shank secured with spring-loaded pins.
• Roll bar stretches and locks into position securely.
• Sharp-headed nose is precision machined to achieve the perfect chisel shape to achieve maximum penetrating power.
• Disassembles quickly and easily for compact storage.
• Comes with PVC, UV resistant storage bag, 50ft of 5/16 Double braid line & stainless-steel thimble, 1/4 Stainless steel shackle and nose cover.
• Mantus M1 2.5lbs (1.13kg) 316L stainless-steel anchor
• PVC, UV resistant storage bag
• 50ft of 5/16” Double braid line & stainless-steel thimble
• ¼” Stainless steel shackle
• Protective nose cover
When making sizing recommendations for a cruising anchor we are referring to the needs of a cruising boat spending most of its time on anchor. In doing so we try to envelope high sustained winds (50 kts) and assume poor holding conditions (low viscosity bottoms). Some may think these recommendations to be too conservative especially when compared to sizing tables from other manufacturers. Companies often make claims of superior anchor efficiency, stating that their small anchor X will outperform a much heavier anchor from their competitors and often use sizing charts as a marketing tool to that end, recommending anchors and anchor systems that are dangerously undersized for their intended use. Comparing surface area can be a good judge for potential holding capability. Our anchor sizing recommendations are presented in the tables below and divided in three categories: ‘Day Anchor’ category is recommended for lighter use, expected winds under 30 knots, ‘Cruising Anchor’ for winds under 50 knots and finally, ‘Storm Anchor’ recommendations are intended for winds above 50 knots. These recommendations are made assuming the worst-case scenario, a poor holding bottom and thus may seem conservative, but we believe are accurate.
Mantus Quick Connect Dinghy Tests
Mantus Quick Connect Dinghy Assembly<br>